Lenovo ThinkSystem D2 Manual page 142

Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0278
User Action:
Information only; no action is required
• FQXSPSE4063I: The system guard configuration is updated: status=[arg1], hardware inventory=
[arg2] and action=[arg3] by user [arg4] from [arg5] at IP address [arg6].
The system guard configuration is updated by user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0279
User Action:
Information only; no action is required
• FQXSPSE4064I: SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP
address [arg5].
SNMPv3 engine ID changed
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0282
User Action:
Information only; no action is required
• FQXSPSS4000I: Management Controller Test Alert Generated by [arg1].
This message is for the use case where a user has generated a Test Alert.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0040
User Action:
Information only; no action is required
• FQXSPSS4001I: Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3],
Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8].
A user configured the Location setting
Severity: Info
138
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute
Node Messages and Codes Reference