Lenovo ThinkSystem D2 Manual page 46

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPEM4023I
One or more virtual drive are in abnormal status that may cause
unavailable virtual drive. Please check the event logs and if events are
targeted to the same disk then replace the drive. If necessary, contact
technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],
[arg5])
FQXSPEM4024I
The RAID controller detected one or more possible configuration
problem within the subsystem. Please check the event logs and if
events are targeted to the same disk then replace the drive. If
necessary, contact technical support for additional assistance.([arg1],
[arg2],[arg3],[arg4],[arg5])
FQXSPEM4025I
One or more virtual drive have problem. Please contact technical
support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4026I
Drive error was detected by RAID controller. Please contact technical
support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4027I
Drive error was detected by RAID controller. Please check the event
logs and if events are targeted to the same disk then replace the drive.
If necessary, contact technical support for additional assistance.
([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4028I
The port [arg1] of PCIe device [arg2] at [arg3] has link [arg4].
FQXSPEM4029I
All PCIe slots on [arg1] may not be functional based upon your current
CPU population.
FQXSPEM4030I
A scheduled operation on the RAID controller has encountered an
issue. Refer to RAID Logs under Server Management, Local Storage,
for details.([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4031I
SSD wear threshold setting is changed from [arg1] to [arg2] by user
[arg3] from [arg4] at IP address [arg5].
FQXSPEM4032I
Acoustic Mode [arg1] has been engaged. Fan speed limits are in
place.
FQXSPEM4033I
Acoustic Mode [arg1] has been disengaged to allow adequate
cooling.
FQXSPFC4000I
The bare metal connection process has been started.
FQXSPFC4001I
The bare metal update application reports a status of [arg1].
FQXSPFC4002I
System running in setup.
FQXSPFC4003I
UEFI deployment boot mode is enabled for NextBoot.
FQXSPFC4004I
UEFI deployment boot mode is enabled for NextAc.
FQXSPFC4005I
UEFI deployment boot mode has been disabled.
FQXSPFW0003I
The System [ComputerSystemElementName] encountered firmware
progress.
FQXSPFW2001I
The System [ComputerSystemElementName] has detected a POST
Error deassertion.
FQXSPIO2003I
System [ComputerSystemElementName] has recovered from a
diagnostic interrupt.
FQXSPIO2004I
Bus [SensorElementName] has recovered from a bus timeout.
42
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents