Lenovo ThinkSystem D2 Manual page 29

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

Information only; no action is required.
• 1D6F0030: SMM_POWER_ON: System Boot Initiated, Initiated by power up was asserted.
A event indicate SMM system power on
Severity: Informational
User Action:
Information only; no action is required.
• 21070150: NODE1_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
• 21070151: NODE2_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
• 21070152: NODE3_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
• 21070153: NODE4_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
.
25
Chapter 2
SMM2 events

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents