Air Requirements; Figure 1-2: Counterbalance Air Flow Vs. Counterbalance Pressure; Figure 1-3: Air Inlet Location - Aerotech ANT130LZS Series Hardware Manual

1.4. Air Requirements

1.4. Air Requirements
The air supply to the counterbalance should be clean and liquid water should not be present.
If nitrogen is used, it must be 99.99% pure and filtered to 0.25 microns. [Recommended]
l
If compressed air is used, it must be filtered to 0.25 microns, dry to 0º F dew point, and oil free.
l
The maximum allowable input pressure specification is 0.6 MPa (87 psi).
The low friction air cylinder consumes air as described in
Figure 1-2: Counterbalance Air Flow vs. Counterbalance Pressure
Figure 1-3: Air Inlet Location
18
ANT130LZS Hardware Manual
Figure 1-2.
www.aerotech.com