Figure 2-3: Mounting Hole Pattern; Table 2-2: Stage To Mounting Surface Hardware - Aerotech ANT130LZS Series Hardware Manual

2.2. Securing the Stage to the Mounting Surface
Tightening torque values for the mounting hardware are dependent on the properties of the surface
to which the stage is being mounted. Values provided in
accurate for your mounting surface. Refer to
Table 2-2: Stage to Mounting Surface Hardware
Mounting Hardware
M6 x 1.0 SHCS
Figure 2-3: Mounting Hole Pattern
22
ANT130LZS Hardware Manual
Table 2-2 are typical values and may not be
Section 2.1. for mounting locations and dimensions.
Typical Screw Torque
7.0 N·m [61 lb·in]
www.aerotech.com