Table of Contents
Advertisement
Handling and Storage
Each stage has a label listing the system part number and serial number. These numbers contain
information necessary for maintenance or system hardware and software updates. Locate this label
and record the information for later reference.
Red, anodized aluminum shipping brackets have been installed to prevent unwanted motion
damage that could occur during shipment. The brackets must be removed before the ANT130LZS
can be operated. Retain the brackets and hardware for future use.
DANGER: Mechanical Hazard!
The product can move manually without electrical power connected.
l
When the shipping brackets are removed, the operator could be exposed to pinch
l
points.
Figure 3:
Shipping Brackets
Storage
Store the stage in the original shipping container. If the original packaging included ESD protective
packaging, make sure to store the stage in it. The storage location must be dry, free of dust, free of
vibrations, and flat.
Section 1.1. Environmental Specifications
Refer to
14
ANT130LZS Hardware Manual
www.aerotech.com
Advertisement
Table of Contents
