Table of Contents
Advertisement
aCCEssoriEs
SECTION 5: ACCESSORIES
H6087—2 Axis Digital Readout (8" x 20")
H6091—3 Axis Digital Readout (8" x 20" x 5")
you will be amazed the list of features for these
dros that include: selectable resolution down to
5µm, absolute/incremental coordinate display, arc
function, line of holes function, angled cuts func-
tion, 199 user defined datum points, centering/
cutter offset, double sealed scales, inches/mil-
limeters, calculator with trig functions, and linear
error compensation.
figure 33. 3 axis digital read out.
G1075—52-pC. Clamping Kit
this clamping kit includes 24 studs, 6 step block
pairs, 6 t-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. the rack is slotted so it can be
mounted close to the machine for easy access.
made for
⁄
" t-slots.
1
2
figure 34. g1075 52-pC. Clamping Kit.
-30-
H8257—primrose Armor plate with Moly-D
Machine and Way Oil 1 Quart
this superior machine and way lubricant prevents
stick slip and chatter due to anti-friction capa-
bilities resulting in greater precision machining
capabilities. provides the thinnest oil film pos-
sible while effectively providing needed lubrication
and rust/corrosion protection. adhesive/cohesive
components are added for vertical surfaces.
resists squeeze out, running, dripping and non-
gumming.
"this is good stuff!
i use it on my lathes
at home."
S. Balolia – President
figure 35. primrose armor plate Lubricant.
T10063—Milling Vise 12
T10064—Milling Vise 17
•
Ultra precise in flatness, parallelism and ver-
ticality.
•
anti-lift mechanism ensures the workpiece
does not lift when jaws are tightened.
•
ductile iron body.
•
Flame hardened vise bed and jaws.
•
sealed bearing system.
•
8200 lbs. of clamping pressure.
figure 36. t10064 milling vise (handle included,
but not shown.
model g0695 (mfg. since 9/10)
⁄
" x 6
⁄
"
5
9
16
16
⁄
" x 8
⁄
"
1
3
8
4
Advertisement
Table of Contents
