Table of Contents
Advertisement
Locks
Use the table, saddle, and knee locks shown in
figures 18–19 to secure the table in position.
X-axis table
Locks
figure 18. X-axis table locks.
z-axis
Lock
figure 19. y-axis and z-axis locks.
Limit Stops
position the limit stops along the limit stop tracks
to confine the distance the table or saddle can
travel (see figures 20–21).
X-axis Limit
stops
figure 20. X-axis limit stops and block.
model g0695 (mfg. since 9/10)
y-axis Lock
Limit Block
y-axis Limit stops
figure 21. y-axis limit stops and block.
Always keep the table locked in place unless
controlled movement is required for your
operation. unexpected table movement dur-
ing operations could cause the cutter to
bind with the workpiece resulting in damage
to the cutter and workpiece, and possible
personal injury.
Limit Block
-23-
Advertisement
Table of Contents
