Instrument Calibration - Promega Maxwell CSC Instrument Technical Manual

4.F. Maxwell ® CSC User Interface Screens (continued)
You will have to select Confi rm on every item of the checklist (Figure 35) before you can start the clean up
procedure. After you confi rm the checklist items, touch the Start button to start the cleanup process. The
Maxwell ® CSC Instrument will go through the Clean Up process and will generate and display the system
report from the Clean Up process. If plungers are not ejected after several clean up attempts the operator
should contact Promega Technical Services (techserv@promega.com; 1-800-356-9526) to determine the
next appropriate steps.
Figure 34. Maxwell
Maxwell ® CSC Instrument.
Figure 35. Clean Up Checklist screen. This screen presents you with a checklist prior to cleanup.
4.G. Instrument Calibration
®
The Maxwell
is necessary.
34
Promega Corpora on · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM424 · Revised 2/15
® CSC Settings screen. From this screen you can perform "Clean Up" for the
CSC Instrument is calibrated at the manufacturing site prior to use. No user calibration
www.promega.com