Table of Contents
Advertisement
4.E. Confi guring the Tablet PC
The Maxwell
®
CSC Tablet PC touch screen allows the user to select options. Most screens contain a series of
options. Selections may be made by touching the appropriate option on the tablet PC screen.
Your IT department or site Administrator should confi gure the Tablet PC according to the IT rules and IT
!
procedures pertinent to your site. The following is a set of guidelines for your IT personnel or site.
Administrator. Depending on your institution's IT policy, you may or may not be able to confi gure or
change the settings for the Tablet PC. Do not load other programs on the tablet as these may interfere with
instrument operation.
The fi rst time you use the Maxwell
the following options. Settings can be changed later if required by following these instructions again.
Touch Screen
The Maxwell
®
CSC Tablet PC has a touch screen and is based on the Microsoft Windows
®
Windows
8 conventions are used throughout the Maxwell
the various screens. Touching and holding on the tablet screen for 3 seconds is equivalent to a Right Click
on a normal PC.
Date and Time
The date and time set on the Tablet PC are used for the instrument run log to indicate when a protocol was
run on the Maxwell
1.
Swipe in from the right screen edge and select the Windows
(or type "control panel" in the Search tool if you do not see 'Control Panel').
2.
In the 'Control Panel' menu touch the Date and Time menu item.
3.
First set your time zone by touching the Change time zone button.
4.
On the 'Time Zone Settings' window select the appropriate time zone for your location and whether
you wish the clock to automatically adjust for Daylight Savings Time.
5.
Touch the OK button to save the time zone settings.
6.
You will be returned to the 'Date and Time Settings' window.
7.
On the 'Date and Time' window touch the Change Date and Time button.
8.
Set the appropriate date and time for your current location using the calendar and clock setting icons.
9.
Touch the OK button to save the date and time settings.
10. You will be returned to the 'Date and Time Settings' window. Touch the OK button on this window to
return to the 'Control Panel'.
11. Close the 'Control Panel' by touching the red X button in the upper right corner of the screen.
Promega Corpora on · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
®
CSC Instrument and Tablet PC you should check the confi guration of
®
CSC Instrument.
®
CSC software and can be used to navigate to
®
8 "Settings" icon. Select Control Panel
®
operating system.
19
TM424 · Revised 2/15
Advertisement
Table of Contents
