Pausing/Resume/Reset A Dispense - Rice Lake 820i Series Operation Manual

The three dispensing speeds include:
• Single speed dispensing - The system turns on fast dispense until the target weight/preact weight is satisfied.
• Parallel speed dispensing - Turns on the fast dispense and slow dispense until the dribble weight is satisfied. The
system then turns off the fast dispense and leaves the slow dispense on until the target weight/preact weight is
satisfied.
• Dual speed dispensing - Turns on the fast dispense until the dribble weight is satisfied. The system turns on the slow
dispense until the target weight/preact weight is satisfied.
The system does the following when the target/preact is reached.
• Turns off the output based on the dispensing mode
• Update the subtotal weight and number of dispenses
• Updates the total and number of dispenses
• Turns on the Dispense Complete output
The system delays for the Delay After Dispense time. After the delay, the weight display then switches to gross weight
and:
• If the gross weight is below low level weight the Refill output will automatically turn on until the gross weight exceeds
the high level weight.
• If the gross weight is above low level weight system, the system resets for the next cycle beginning with Step #1.
4.4

Pausing/Resume/Reset a Dispense

1. Press the E-Stop button. System turns off all outputs and displays System Paused.
2. Press the Resume switch to resume where the current batch left off.
3. Press the Reset switch to return to Step 1 to start over.
10:28AM
05/20/2011
250
Target
Dribble Preact
100.0 Lb 75 0.0
Fast Dispense
Consec. #
Subtotal
2 120 Lb
Figure 4-12. Dispense Screen
SCALE #1
SCALE
Gross
#1
Lb
High Level Low Level
500 Lb 150 Lb
Total
3200 Lb
© Rice Lake Weighing Systems ● All Rights Reserved
Operation
19