Download
Share
Print this page
Rice Lake 920i Options Installation
  1. Manuals
  2. Brands
  3. Rice Lake Manuals
  4. Measuring Instruments
  5. iRite 920i
  6. Options installation

Rice Lake 920i Options Installation

Wlan
Hide thumbs Also See for 920i:

Advertisement

Quick Links

Download this manual
920i
, 820i
and 720i
®
®
WLAN Option Installation
The optional WLAN (Wireless Local Area Network) Option (Kit 206271) can be installed inside the 920i, 820i and 720i indicators
into any available option slot. The WLAN Option can be factory installed upon request when ordering or can be purchased
separately and installed on site. The WLAN Option can be used for real-time data transmission between the indicator and other
devices and software over a WLAN. Configuration of the WLAN Option is required before it can be used on a WLAN.
Manuals and additional resources are available from the Rice Lake Weighing Systems website at
Warranty information can be found on the website at
The WLAN Option features a Lantronix
Guide for detailed instructions on the WiFi module.
1 : Parts Breakdown
The WLAN Option comes in a kit containing the necessary items used for installation of the card.
Item No.
1
205754
2
14822
3
112228
4
98357
July 7, 2021
®
xPico 240 WiFi module. Visit
®
Figure 1. WLAN Option Parts Breakdown (Inside 920i Enclosure)
Part No.
Card, Dual Wireless/RS232 xPico Device Server & RS232 Serial Interface
Screw, 4-40 NC x 1/4 Phillips Pan Head with Internal Tooth Lock Washer
Cable, RF UFL to RSMA, 6 Inch, WiFi
Antenna, 2.4 GHz 802.11B/G Lantronix Wireless Device Server Antenna
Table 1. WLAN Option Parts List
www.ricelake.com/warranties
www.lantronix.com
RICE LAKE
C3
U6
C9
R3
R2
C8
PWR
JP2
UART
RS232
TX
BUS
TX
AUX
R6
RX
RX
LED3
ASSY
LED2
PN/Rev
RXD
D1
TVS1
G2E
R13
LB2
66
64
61
57
1
54
R11
R10
JP3
C18
C17
ON
OFF
C6
U7
R5
C14
R12
TxD
RxD
21
34
xPICO
J3
Description
www.ricelake.com
to view the xPico 200 Series User
1
U5
C7
MANUAL
RESET
RESET
TXD
RS232
SELECT
xPICO WiFi
2
CONFIG
JP11
JP10
C15
C16
OFF
U9
ON
Aux
GND
V+
3
4
Qty
1
2
1
1
PN 206461 Rev A

Advertisement

loading
Need help?

Need help?

Do you have a question about the 920i and is the answer not in the manual?

Questions and answers

Related Manuals for Rice Lake 920i

Summary of Contents for Rice Lake 920i

  • Page 1 WLAN Option Installation The optional WLAN (Wireless Local Area Network) Option (Kit 206271) can be installed inside the 920i, 820i and 720i indicators into any available option slot. The WLAN Option can be factory installed upon request when ordering or can be purchased separately and installed on site.
  • Page 2 Electric Shock Hazard – Option card is not hot swappable. WARNING The 920i, 820i and 720i do not have a on/off switch. Always disconnect power before opening an enclosure. A grounding wrist strap must be worn to protect components from electrostatic discharge (ESD) when working CAUTION inside an enclosure.

  • Page 3: Option Jumpers

    Soft AP. NOTE: This is an advanced feature and the jumper is not enabled by default. Contact Rice Lake if there is a need to disable the Soft AP. Default Jumper – This jumper connects to the Default pin of the WiFi module. This jumper can reset the module to factory OEM defaults if the user cannot do so through the Web Manager.

  • Page 4: Reset Button

    920i, 820i and 720i WLAN Option Installation 4 : Reset Button The Reset Button performs a reset and reboots the WiFi module. RICE LAKE Reset MANUAL Button RESET RESET UART RS232 LED3 ASSY LED2 Figure 4. Reset Button Location 5 : WiFi Module Default Procedure The JP4 DFLT jumper can be used to reset the configuration of the WiFi module to factory OEM defaults.
  • Page 5 9600 (Baud), 8 (Bits), and None (Parity) in order for the indicator to work with the WiFi module. Other settings, such as the port's Function, Echo, and Response can be changed as needed. © Rice Lake Weighing Systems ● All Rights Reserved...

  • Page 6: Wireless Configuration

    920i, 820i and 720i WLAN Option Installation 9 : Wireless Configuration Configuration of the wireless settings is done through the WLAN Option's built-in Web Manager. If already connected to a network, a web browser on that network can connect to the Web Manager by simply navigating to the WLAN Option Card's IP Address.
  • Page 7 If the network is hidden, enter the network name in the box provided. The Web Manager provides notes and information related to the current page in the far right column. Note © Rice Lake Weighing Systems ● All Rights Reserved...
  • Page 8 920i, 820i and 720i WLAN Option Installation 8. The wireless network information page appears. Enter the network password (if applicable). Contact location’s IT administrator to obtain network credentials as needed based on the security that is in place. Note 9. Click Submit to apply and save the settings. A message displays at the top of the page to show if the new network’s Profile saved successfully.
  • Page 9 • AES/CCMP and TKIP encryption, WPA/WPA2 Personal • WPA2 Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST) • SSLv3/TLS 1.2 with PKI and X.509 Certificates (up to 4096-bit Keys) • AES Algorithm, 256-bit, 192-bit, 128-bit © Rice Lake Weighing Systems ● All Rights Reserved...
  • Page 10 Specifications subject to change without notice. Rice Lake Weighing Systems is an ISO 9001 registered company. 230 W. Coleman St. • Rice Lake, WI 54868 • USA U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319...

This manual is also suitable for:

820i720i