Call Feature Setting; Dial Plan - ATCOM AT800 Series User Manual

AT800 Series User
AT800 AT800 AT800 Series Series Series User User User Manual
the far end does not support this codec.) Select no, the phone will contains all the codec
G.711A/u, G.722, G.723, G.726-16, G.726-24, G.726-32, G.726-40, G.729, iLBC, Lin-16 in SDP.
Defaults to no.
DTMF DTMF DTMF Tx Tx Tx Tx Method Method Method
3. DTMF Method---select the method to transmit DTMF signals to the far end: Inband, rfc2833,
INFO. Defaults to RFC2833.
Call feature setting
Call Call Call feature feature feature setting setting setting
1. 1. 1. 1. Message Message Message Message waiting--- waiting---Choose yes to enable Message waiting indicator. waiting--- waiting---
2. 2. 2. 2. Voicemail Voicemail Number--- Number---
Voicemail Voicemail Number--- Number---Set voicemail number.
3. 3. 3. 3. UDP UDP UDP UDP Keep Keep alive Keep Keep alive enable--- alive alive
the server port is still available.
4. 4. 4. 4. UDP UDP UDP UDP keep keep keep keep alive alive alive alive intvl---
Default Default Ring--- Ring---
5. Default Default Ring--- Ring---Set default ring tone for incoming calls.
6. 6. 6. 6. SRTP--- SRTP--- SRTP--- SRTP---Enable SRTP(Secure Real-time Transport Protocol), and it should work with sip server.
Dial Plan
Dial Dial

Dial Plan

Plan Plan
Dial plans specifies how to interpret digit sequences dialed by the user, and how to convert those
sequences into an outbound dial string. The syntax for dial plan closely resembles the corresponding
syntax specified by MGCP and MEGACO.
The dial plan functionality is regulated by the following configurable parameters:
� Interdigit_Long_Timer---refer to Interdigit_long_timer part for details
� Interdigit_Short_Timer---refer to interdigit long timer part for details
� Dial_plan
Dial plan contains a series of digit sequences, separated by "|" character. The collection of
sequences are enclosed in parentheses, "(" and ")".
Defaults to (xxxxxxxxxxxx.)
When a user dials a series of digits, each sequence in the dial plan is tested as a possible match.
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
enable---Choose yes to send UDP message to sip server port, so as to ensure enable--- enable---
intvl---Set expire time of the keep alive UDP. intvl--- intvl---
www.atcom.cn
The