Polycom DMA 7000 Getting Started Manual page 8

DMA Getting Started Guide
System Configuration
Information
Virtual signaling IPv4
Virtual signaling IPv6
Subnet mask
IPv6 prefix length
IPv4 gateway
Auto-negotiation
General System Network Settings
DNS search domains
DNS 1
DNS 2
DNS 3
Domain
Signaling DSCP
Default IPv6 gateway
4
My System Values Description
IP address(es) of the virtual signaling
host.
Network mask that defines the
subnetwork of the system's signaling
interface.
IPv6 CIDR value.
IP address of the gateway server used to
route network traffic outside the subnet.
Yes or no. If no, indicate speed and full or
half duplex.
Space- or comma-separated list of fully
qualified domain names to query on the
DNS servers to resolve host names
(optional). The system domain is added
automatically; you don't need to enter it.
IP address of the primary Domain Name
System server.
Optional, but strongly recommended. At
least one DNS server is required in order
to import global groups from an enterprise
directory and for CMA integration.
IP address of a second DNS server
(optional).
IP address of a third DNS server
(optional).
Fully qualified domain name for the
system (optional).
The DSCP value is used to classify
packets for quality of service (QoS)
purposes. If you're not sure what value to
use, leave the default of 0.
The interface to use for accessing the
IPv6 gateway, generally eth0. Optionally,
the gateway's address and the interface,
specified as:
<IPv6_address>%eth0
Polycom, Inc.