Polycom DMA 7000 Getting Started Manual page 17

Polycom, Inc.
Verify that the first server (Node 1) is running and its front panel LCD
c
displays DMA Ready. Then turn on the second server (Node 2).
After the second server boots, it detects and gets its configuration
settings from Node 1 and joins the cluster. When done, both servers'
LCDs display DMA Clustered.
12 Log back into the system and complete your system setup:
— Install your license(s).
— Check security configuration settings and change if necessary.
— Add MCUs to the system, add conference templates for the MCUs,
and set conference defaults.
— Configure the system's signaling settings to support H.323, SIP, or
both.
— Install security certificates.
— Manage system access, either by adding local users or by integrating
the Polycom DMA system with your enterprise directory, remove the
default admin login, and secure the system.
— Make other desired configuration changes.
® ™
Polycom DMA System Server Setup
13