Polycom DMA 7000 Getting Started Manual page 12

DMA Getting Started Guide
8
On the Network page, select the correct System node configuration and
4
System split network setting.
Enter the network values from the
5
If you need to set up a special network routing rule or rules, click
6
Routing Configuration, create the rule(s), and click OK.
In a split network configuration, routing rules are necessary for proper routing of
network traffic. If you aren't sure what rule or rules you need, consult the
appropriate IT staff or network administrator for your organization.
Click Next.
7
On the System Time page:
8
Select the correct System time zone for your location.
a
We strongly recommend selecting the best location-specific setting,
not one of the generic GMT offset settings.
Leave Auto Adjust For Daylight Savings checked (deselecting this
b
may cause problems, especially with NTP servers).
First-Time Setup Worksheet.
Polycom, Inc.