DMA Getting Started Guide
Collect Necessary Materials
Complete the First-Time Setup Worksheet
System Configuration
Information
One node or two?
Separate management
and signaling
interfaces, or
combined?
IPv4, IPv6, or both?
Node 1
Management host
name
2
Before you install a Polycom DMA system, collect these materials:
•
Polycom DMA system server shipment
•
Completed First-Time Setup Worksheet
•
PC running Microsoft® Windows® (XP Pro or Vista) with:
— USB port
— Java™ 1.6 or newer
— Microsoft Internet Explorer® 7 or newer, or Mozilla Firefox® 3 or
newer
— Adobe® Flash® Player 9.0.124 or newer
Before you begin system setup, fill out the My System Values column of this
worksheet.
First-Time Setup Worksheet
My System Values
Description
For a single-node system, skip the Node 2
section below.
If the same network will be used for both
management (administrative access) and
signaling, skip the signaling IP addresses
and the Shared Signaling Network
Settings section below.
Complete the appropriate address fields
below for your choice.
Local host name of the first (or only)
Polycom DMA system server's
management (or combined) interface.
Must be a valid host name: the letters a - z
(case-insensitive), digits 0 - 9, and internal
hyphens are allowed.
Polycom, Inc.