Receiving A Pstn Call, Sending Acknowledge Back (Ack Bq) - Furuno FS-5070 Operator's Manual

Then, one of the following displays appears.
PSTN connected.
:
DESTINATION 001234567
TEL NO. :
1234567890123456
TELEPHONE: 2222.2kHz
DSC FREQ :
PSTN call connected
13. Follow the instructions below depending on the message shown in 3) above.
PSTN connected: Your phone rings; pick up the handset and communicate with the party
you called.
PSTN end of message in progress: The channel could not be used. Press the CANCEL
key to return to the DSC standby screen.
Unable acknowledge message received
1. The audio alarm sounds; press the CANCEL key or ENTER knob to silence the alarm.
The display shown below appears.
*
Received message
MAR-23-2006-23:01
UNABLE ACKNOWLEDGE
BUSY
SENDER ID :
TEL NO. :
GO TO VIEW
2. Press the CANCEL key to return to the DSC standby screen.
3. Try the call again later.
No response! Try calling again?
Re-send call: Push the ENTER knob followed by the CALL key.
Cancel call: Press the CANCEL key to return to the radiotelephone screen.
5.8.2

Receiving a PSTN call, sending acknowledge back (ACK BQ)

The following display appears when a PSTN call is received when automatic acknowledge
is turned on.
Able acknowledge
message in progress!
DESTINATION ID :
TEL NO. :
1234567890123456
DSC FREQ :
TIME TO GO:
PSTN end of
message in progress!
DESTINATION
TEL NO.
12577.5 KHZ DSC FREQ :
TIME TO GO:
*
001234567
1234567890123456
10M10S
001234567
4208.0 KHZ
8S
5. ROUTINE MESSAGE CALLING, RECEVING
:
001234567
:
1234567890123456
12577.5 KHZ
8S
PSTN end of call
5-33