Furuno FS-5070 Operator's Manual page 64

5. ROUTINE MESSAGE CALLING, RECEVING
How to Set DSC Frequency
1. Rotate the ENTER knob to choose DSC FREQ and then push the ENTER knob.
Compose msg.
MSG TYPE:
STATION ID:
PRIORITY:
COMM MODE:
COMM FREQ:
DSC FREQ
GO TO VIEW
2. Rotate the ENTER knob to choose appropriate DSC band and then push the ENTER
knob. One of the menus shown below appears depending on the band selected.
Compose msg.
MSG TYPE : Individual
2 MHz
4 MHz
Station ID : 001234567
INTL :
T12577.5/R12657.0
6 MHz
Priority : Routine
LOCAL1 :
T12578.0/R12657.5
8 MHz
LOCAL2 :
T12578.5/R12658.0
Com. type : Telephone
12 MHz
COM. FREQ : No infor
: 12M-INTL
DSC FREQ
GO TO ALL VIEW
2MHz menu
INTL :T 2189.5/R 2177.0
4MHz menu
INTL :T 4208.0/R 4219.5
LOCAL1 :T 4208.5/R 4220.0
LOCAL2 :T 4209.0/R 4220.5
6MHz menu
INTL :T 6312.5/R 6331.0
LOCAL1 :T 6313.0/R 6331.5
LOCAL2 :T 6313.5/R 6332.0
3. Rotate the ENTER knob to choose DSC frequency and then push the ENTER knob. The
display shows the DSC frequency band selected, at "DSC FREQ".
Safety or urgency priority
For safety and/or urgency priority "COMM FREQ" is automatically set to the same pair
frequency as the DSC frequency.
1. Rotate the ENTER knob to choose DSC FREQ and then push the ENTER knob.
Compose msg.
INDIVIDUAL
MSG TYPE:
2187.5
001234567
STATION ID: 4207.5
6312.0
: SAFETY
PRIORITY
8414.5
: TELEPHONE
COMM MODE
12577.0
COMM FREQ : 2182.0KHZ
16804.5
: 2187.5 KHZ
DSC FREQ
GO TO VIEW
2. Rotate the ENTER knob to choose appropriate frequency and then push the ENTER
knob.
5-4
INDIV
2 MHZ
16 MHZ
4 MHZ
123456
18 MHZ
6 MHZ
RO
22 MHZ
8 MHZ
TELEP 25 MHZ
12 MHZ
NO I
: 2M-INTL
Rotate the ENTER knob
to scroll menu to view user
channels (if registered).
USER CH1
USER CH2
USER CH3
USER CH4
8MHz menu
INTL :T 8415.0/R 8436.5
LOCAL :T 8415.5/R8437.0
LOCAL :T 8416.0/R8437.5
12MHz menu
INTL :T 12577.5/R12657.0
LOCAL1 :T 12578.0/R12657.5
LOCAL2 :T 12578.5/R12658.0
16MHz menu
INTL :T 16805.0/R16903.0
LOCAL1 :T 16805.5/R16903.5
LOCAL2 :T 16806.0/R16904.0
p
Rotate the ENTER
knob to scroll.
LOCAL = Local channel
:
T12345.0/R12345.0
:
T12345.5/R12345.5
:
T12346.0/R12346.0
:
T12346.5/R12346.5
18MHz menu
INTL
LOCAL1 :T18899.0/R19704.0
LOCAL2 :T18899.5/R19704.5
22MHz menu
INTL
LOCAL1 :T 22375.0/R22444.5
LOCAL2 :T 22375.5/R22445.0
25MHz menu
INTL
LOCAL1 :T 25209.0/R26121.5
LOCAL2 :T 25209.5/R26122.0
:T18898.5/R19703.5
:T 22374.5/R22444.0
:T 25208.5/R26121.0