Furuno FS-5070 Operator's Manual page 82

5. ROUTINE MESSAGE CALLING, RECEVING
3. Push the ENTER knob to open the AREA menu and then enter the area range as shown
on page 5-17.
4. Push the ENTER knob to open the COMM MODE menu.
5. Rotate the ENTER knob to choose communication type desired (TELEPHONE or
NBDP-FEC) and then push the ENTER knob.
6. Push the ENTER knob to open the DSC FREQ menu.
Compose msg.
2187.5
: Medical
MSG TYPE
4207.5
transport
6312.0
AREA: 44 N 1
: Urgency
8414.5
PRIORITY
12577.0
: Telephone
COMM MODE
16804.5
DSC FREQ
GO TO VIEW
7. Rotate the ENTER knob to choose appropriate frequency and then push the ENTER
knob. The display changes as below.
Compose msg.
MSG TYPE
TRANSPORT
AREA :44 N 125 E 17
PRIORITY : URGENCY
COMM MODE : TELEPHONE
COMM FREQ : 2182.0 kHz
DSC FREQ :
GO TO VIEW
8. Press the CALL key to send the call (transmission time: about seven seconds). The
display shows "Medical transport message in progress!" while the call is being sent.
Medical transport
message in progress!
AREA: 42N 123 E 5 10
PRIORITY: URGENCY
DSC FREQ :
TIME TO GO :
9. After the call is sent, press the CANCEL key twice to show the radiotelephone screen.
10. Inform all ships (by radiotelephone) that your ship is transporting medical supplies. For
NBDP do the following:
Sending message by NBDP Terminal Unit
The message "STATION ENTRY COMPLETED FROM DSC. Press any key to escape."
Appears on the NBDP's display.
1. Press any key on the NBDP Terminal Unit to erase the message.
2. Press the function key F3 on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
3. Choose "Call Station" and then press the Enter key.
4. "DSC" is selected; press the Enter key. "Connect" appears in reverse video.
5. Type and transmit your message.
5-22
:2187.5 kHz
VIEW
: MEDICAL
21
2187.5 KHZ
2187.5 kHz
7S