Furuno FS-5070 Operator's Manual page 71

*
Received message
MAR-23-2006-23:00:00
INDIVIDUAL REQUEST
SENDER ID:
PRIORITY: ROUTINE
TELEPHONE
ANSWER
2. Rotate the ENTER knob to choose ANSWER and then push the ENTER knob.
3. Rotate the ENTER knob to choose MSG TYPE and then push the ENTER knob.
Compose msg.
MSG TYPE : ABLE
ACKNOWLEDGEMENT
ABLE
STATION ID :
001234567
COMM MODE : TELEPHONE
UNABLE
COMM FREQ : CH401
DSC FREQ: 4M-INTL
GO TO VIEW
4. Rotate the ENTER knob to choose UNABLE and then push the ENTER knob.
5. Push the ENTER knob to open the REASON menu.
Compose msg.
MSG TYPE : UNABLE
ACKNOWLEDGEMENT
NO REASON
BUSY
REASON : NO REASON
GIVEN
EQUIP DISABLED
STATION ID :
001234567
MODE NOT USABLE
DSC FREQ :
12,577.5 KHZ
CH NOT USABLE
6. Rotate the ENTER knob to choose an appropriate reason and then push the ENTER
knob. The display changes as below.
Compose msg.
MSG TYPE : UNABLE
ACKNOWLEDGEMENT
REASON : CHANNEL NOT
USABLE
STATION ID : 121234567
DSC FREQ :
4M-INTL
GO TO VIEW
7. Press the CALL key to send the acknowledge call. The display shows "Unable
acknowledge message in progress!" while the call is being sent.
Unable acknowledge
message in progress!
REASON: CHANNEL NOT USABLE
DESTINATION ID:
PRIORITY:
DSC FREQ :
TIME TO GO:
*
121234567
CH 401
To view contents, rotate ENTER knob
10M10S
to choose GO TO VIEW and then push
GO TO VIEW
the ENTER knob.
121234567
ROUTINE
4208.0 KHZ
6S
5. ROUTINE MESSAGE CALLING, RECEVING
5-11