Nbdp Transmitting, Receiving; Manual Calling - Furuno FS-5070 Operator's Manual

10. NBDP TRANSMITTING,
RECEIVING
This chapter mainly shows you how to transmit and receive telex messages.
10.1

Manual Calling

The simplest way to communicate with a telex subscriber is Manual Calling. For the ARQ
mode, you may display beforehand the message to send, or type your message manually.
1. Press the function key F3 to display the Operate menu.
2. Press the 9 key to choose Set Frequency.
3. Input Tx and Rx frequency pair.
4. Press the Enter key.
NOTICE
Before calling, watch the intended TX
frequency carefully to confirm that is
unoccupied.
Operate
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: Manual Calling
9: Set Frequency
Operate menu
Set Frequency
Tx Freq:
RX Freq:
Set frequency screen
0.00
0.00
10-1