Furuno FS-5070 Operator's Manual page 101

3. Push the ENTER knob to open the user channel options window.
*** User ch entry
MODE: SSB
00201. TX: 2111.5
00202. TX: 2222.0
MODE
00203. TX: 2333.5
CH
00204. TX: 2444.0
FREQ
00205. TX: 2555.5
4. Rotate the ENTER knob to choose MODE and then push the ENTER knob.
*** User ch entry
MODE:
SSB
NBDP
00201. TX: 2111.5
DSC
00202. TX: 2222.0
CW
00203. TX: 2333.5
00204. TX: 2444.0
00205. TX: 2555.5
5. Rotate the ENTER knob to choose appropriate mode among SSB, NBDP and DSC and
then push the ENTER knob.
***
User ch entry
MODE: SSB
00201. TX: 2101.5
00202. TX: 2202.0
00203. TX: 2303.5
00204. TX: 2404.0
00205. TX: 2505.5
6. Key in channel no. and then push the ENTER knob. For example, press 0, 1, 2, 3, 4 and
then push the ENTER knob to enter channel 01234.
** User ch entry
MODE : SSB
01234. TX: 0.0
01240. TX: 12666.0
01241. TX: 12777.5
TX :
01242. TX: 12999.5
RX :
01250. TX: 12100.0
7. Enter TX frequency with the numeric keys.
8. Rotate the ENTER knob to choose RX.
9. Enter RX frequency with the numeric keys and then push the ENTER knob.
10. Rotate the ENTER knob to display all channels entered.
11. Press the CANCEL key twice.
**
CH: 2-01
RX: 2111.5
RX: 2222.0
RX: 2333.5
RX: 2444.0
RX: 2555.5
**
CH: 2-01
RX: 2111.5
RX: 2222.0
RX: 2333.5
RX: 2444.0
RX: 2555.5
** - 256 channels may be registered.
- Band no. setting range is 1-29 and band channel no. range is
CH : 2-01
C H : 0 − 0 0
01-99.
RX: 2101.5
- For DSC, four channels can be registered per band (2, 4, 6
RX: 2202.0
8, 12, 16, 18, 22, 25).
RX: 2303.5
RX: 2404.0
RX: 2505.5
**
CH : 12-34
RX: 0.0
RX: 13666.0
RX: 13777.5
0.0 kHz
RX: 13999.5
0.0 kHz
RX: 13100.0
6. MENU OPERATION
6-3