Furuno FS-5070 Operator's Manual page 104

6. MENU OPERATION
13. Rotate the ENTER knob to choose appropriate DSC band and then push the ENTER
knob.
14. Rotate the ENTER knob to choose appropriate DSC frequency and then push the
ENTER knob.
15. Enter file name and number as shown below.
How to Enter File Name and Number
1. Push the ENTER knob to open the file name entry window.
* Message file entry
FILE NAME
: ----------------
FILE NUMBER : ---
2. Use the numeric keys and ENTER knob to enter file name (max. 16 characters). For
example, enter FURUNO as the file name.
Key and available character, symbol
: 1→(blank)→1
1
: 2→A→B→C→2
2ABC
: 3→D→E→F→3
3DEF
: 4→G→H→I→4
4GHI
: 5→J→K→L→5
5JKL
: 6→M→N→O→6
6MNO
7PQRS : 7→P→Q→R→S→7
: 8→T→U→V→8
8TUV
9WXYZ : 9→W→X→Y→Z→9
: 0→_→ − →0
0
1. Rotate ENTER knob to select location.
2. Press appropriate key.
3. Push the ENTER knob to open the file number entry window. Key in file number in three
digits with the numeric keys and then push the ENTER knob. For example, press 0, 0, 1,
ENTER knob to enter file number 001.
*
Message file entry
FILE NAME
: FURUNO
001
---
FILE NUMBER :
6-6
FILE ENTRY
Note: The available file number is 001-799 and
900-999.
FILE ENTRY
How to enter "FURUNO" as file name
1. Press the 3 key to display F.
2. Rotate ENTER knob to shift cursor.
3. Press the 8 key to select U.
4. Rotate ENTER knob to shift cursor.
5. Press the 7 key to select R.
6. Rotate ENTER knob to shift cursor.
7. Press the 8 key to select U.
8. Rotate ENTER knob to shift cursor.
9. Press the 6 key to select N.
10. Rotate ENTER knob to shift cursor.
11. Press the 6 key to select O.
12. Push the ENTER knob.