Furuno FS-5070 Operator's Manual page 63

11. Rotate the ENTER knob to choose communication frequency setting method desired
and then push the ENTER knob. For FREQUENCY and CHANNEL, see "How to Set
Working Frequency, Channel" on the next page. NO INFO and POSITION let the
receiving station set the working frequency. Choose NO INFO or POSITION to send the
call to a coast station; FREQUENCY or CHANNEL to send the call to a ship station.
How to Set Working Frequency, Channel
To send a call, set the working frequency as below, to communicate with the receiving
station. The working frequency can be entered by Tx and Rx frequencies or channel
number.
Routine priority
8. After selecting FREQUENCY or CHANNEL, one of the following pop-up windows
appears.
TX: 0.0 kHz
RX: 0.0 kHz
(Coast station, Duplex)
a) Key in TX frequency or channel with the numeric keys. For channel, push the ENTER
knob to finish.
b) Rotate the ENTER knob to choose the RX field, key in RX frequency and then push the
ENTER knob to finish.
Safety or urgency priority
For safety or urgency priority the communication frequency cannot be selected; it is
automatically set to the pair frequency as set for the DSC frequency.
12. Follow the instructions on the next page to choose DSC frequency desired.
5. ROUTINE MESSAGE CALLING, RECEVING
TRX: 0.0 kHz
(Mobile station, Simplex)
Frequency
CH: 0
Channel
5-3