Key Assignment; Special Messages - Furuno FS-5070 Operator's Manual

6. MENU OPERATION
6.14

Key Assignment

The 8/PRINT key can function as a short-key, providing quick access to a function without
opening the menu. You can program one of the functions listed below, and the default
setting is NONE (shortcut function is disabled).
NONE: Not assigned any function.
•
NB: Noise blanker on/off
•
TONE: Transmit/stop the tone signal.
•
SDUP/DUP: Changes the communication mode on the duplex channel (FS-5070 only)
•
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USR SETUP, and push the ENTER knob.
3. Rotate the ENTER knob to choose KEY ASSIGN, and push the ENTER knob.
Key assign setup
PRINT KEY: NONE
4. Push the ENTER knob.
5. Rotate the ENTER knob to choose NONE, NB, TONE or SDUP/DUP as appropriate.
6. Push the ENTER knob.
6.15

Special Messages

Permission to transmit NEWTRAL CRAFT and MEDICAL TRANSPORT can be enabled or
disabled as follows:
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USR SETUP, and push the ENTER knob.
3. Rotate the ENTER knob to choose SPECIAL MSG, and push the ENTER knob to show
the following menu.
Special Msg Setup
MSG
MSG
4. Choose NEUTRAL MSG or MEDICAL MSG, and then push the ENTER knob.
UNABLE
5. Choose ABLE or UNABLE as appropriate, and then push the ENTER knob.
6. Press the CANCEL key to return to the radiotelephone screen.
6-22