Preparing Group Calls - Furuno FS-5070 Operator's Manual

4. Push the ENTER knob. The display shows the name and file number entered.
*
Message file entry
FURUNO
No.001 file entered
Go to next file?
YES: [ENT] key
NO: [CANCEL] key
FILE ENTRY
5. Push the ENTER knob to continue
6.5.2

Preparing group calls

To receive the group calls, registering of the group ID is necessary as below.
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose MESSAGE.
3. Push the ENTER knob.
4. Push the ENTER knob to open the MSG TYPE menu.
*
Message file entry
INDIVIDUAL
MSG TYPE : INDIVIDUAL
PSTN MESSAGE
STATION ID : ---------
TEST MESSAGE
COMM MODE : TELEPHONE
GROUP MESSAGE
COMM FREQ : NO INFO
DSC FREQ : 2M-INTL
5. Rotate the ENTER knob to choose GROUP MESSAGE and then push the ENTER knob.
6. Push the ENTER knob to open the GROUP ID entry window.
*
Message file entry
MSG TYPE: GROUP MESSAGE
: 0 --------
GROUP ID 000000000
COMM MODE : TELEPHONE
COMM FREQ : NO INFO
DSC FREQ : 2M-INTL
7. Key in ID of group with the numeric keys and then push the ENTER knob.
If the file name or number exists the message
"Duplicate name (number) ! Overwrite OK?" appears.
Push the ENTER knob to write over the name, or
press the CANCEL key to escape.
6. MENU OPERATION
6-7