5. ROUTINE MESSAGE CALLING, RECEVING
The timer counts down to zero and then the following display appears.
Pick up the handset
or press CALL key.
DESTINATION ID :
TEL NO.
:
1234567890123456
TELEPHONE: 2222.2kHz
DSC FREQ :
TIME TO GO: 60S
1. Pick up the handset or press the CALL key within one minute.
PSTN connection
message in progress!
DESTINATION ID :
TEL NO.
:
1234567890123456
TELEPHONE: 2222.2kHz
DSC FREQ :
TIME TO GO:
The timer counts down to zero and then the following display appears.
Waiting for
acknowledgement.
SENDER ID :
001234567
TEL NO.
:
1234567890123456
TELEPHONE: 2222.2kHz
DSC FREQ :
TIME TO GO: 25S
Shortly thereafter, one of the following messages appears.
PSTN connected.
DESTINATION ID :
001234567
TEL NO.
:
1234567890123456
TELEPHONE :
2222.2 kHz
DSC FREQ :
4208.0KHZ
PSTN call connected
2. Do one of the following depending on the message shown at step 5. Note that volume
can be adjusted in this condition. Rotate the PWR/VOL knob.
PSTN connected: Communicate with party.
PSTN end of message in progress!: The channel could not be used. Press the CANCEL
key to return to the DSC standby screen.
5-34
001234567
4208.0 KHZ
RESENDING
001234567
4208.0 KHZ
7S
2222.2 KHZ
RESENDING
PSTN end of
message in progress!
DESTINATION ID :
TEL NO.
:
1234567890123456
DSC FREQ :
TIME TO GO:
PSTN end of call
001234567
4208.0KHZ
7S