Furuno FS-5070 Operator's Manual page 62

5. ROUTINE MESSAGE CALLING, RECEVING
3. Push the ENTER knob to open the STATION ID menu, and then rotate the ENTER knob
to choose MANUAL or SELECT.
4. For SELECT, you can choose an ID from the message file list stored.
5. For MANUAL, use the numeric keys to key in the ID of the station where to send the call
and then push the ENTER knob.
Compose msg.
MSG TYPE : INDIVIDUAL
:
* * * * * * * * * :
STATION ID
: ROUTINE
PRIORITY
: TELEPHONE
COMM MODE
COMM FREQ : NO INFO
: 2M-INTL
DSC FREQ
GO TO VIEW
6. Push the ENTER knob to open the PRIORITY menu.
Compose msg.
: INDIVIDUAL
MSG TYPE
ROUTINE
: ---------
STATION ID
SAFETY
:
PRIORITY
URGENCY
: TELEPHONE
COMM. MODE
: NO INFOR
COMM. FREQ
: 2M-INTL
DSC FREQ
GO TO VIEW
7. Rotate the ENTER knob to choose appropriate priority (normally ROUTINE) and then
push the ENTER knob.
8. Push the ENTER knob to open the COMM MODE menu.
9. Rotate the ENTER knob to choose communications type desired and then push the
ENTER knob.
10. For routine priority, push the ENTER knob to open the COMM FREQ menu. For safety
and urgency priority, go to step 12.
Compose msg.
: INDIVIDUAL
MSG TYPE
STATION ID : 123456789
NO INFO
PRIORITY
FREQUENCY
COMM MODE
CHANNEL
COMM FREQ
POSITION*
DSC FREQ
: 12M-INTL
GO TO VIEW
5-2
Compose msg.
: INDIVIDUAL
MSG TYPE
: ---------
STATION ID
TELEPHONE
: ROUTINE
PRIORITY
NBDP-ARQ
COMM MODE :
NBDP-FEC
: NO INFOR
COMM FREQ
DATA
: 2M-INTL
DSC FREQ
GO TO VIEW
* POSITION is displayed if a coast
station is specified at step 4.
For Safety or
Urgency Priority
TELEPHONE
NBPD
NBDP-FEC