Co-Linear - Valor Portrait 530INI Installation Manual

Installation Planning

Co-Linear

Co-Linear—as supplied
Venting options
Rear view
Co-linear appliance, as supplied
(2 x 3" diameter liners)
530INI/IPI as supplied
Co-linear installation into existing F/P
3" min. 2 x 3"
bend radius liners
530
engine
25-1/2"
Approved co-linear
termination or approved
co-linear adapter
and approved
co-axial
Flashing
termination
NOTE
536/541/563 fronts require aclosure plate
(582/583CPB) to ensure proper positioning of
casting. Other fronts are supplied wih a backing
plate included.
530INI/IPI with 720SWK—Sidewall Kit
Sidewall co-linear installation into existing F/P
using 720SWK—for units with logs, rocks or driftwood only
(see installation instructions supplied with 720SWK)
720SWK
Terminal
40'
max
8'
Min. 3'-0"
min
*Max. 5'-0"
2 x 3"
liners
*Beyond 5'-0", the sidewall terminal may be
used but will require restrictors. See 530 section
further in this manual.
* May be extended beyond 5'-0". Refer to the
720SWK installation instructions
Overview
3" min.
Bend
Radius
3" Liners
11