AUMA SQ 05.2 Operation Instructions Manual page 18

Assembly
18
SQ 05.2 SQ 14.2/SQR 05.2
4. Place coupling [1] onto valve shaft [2] and secure against axial slipping by using
a grub screw [3] or a clamping washer and a screw with curved spring lock
washer [4]. Thereby, ensure that dimensions X, Y or L are observed (refer to
figure and table <Mounting positions for coupling>).
Figure 12: Examples: Fit coupling
[1] Coupling
[2] Valve shaft
[3] Grub screw
[4] Clamping washer and screw with curved spring lock washer
Figure 13: Mounting positions for coupling
Table 8:
Mounting position of the coupling within fitting dimensions according to AUMA definition
Dimensions [mm] SQ 05.2
EN ISO 5211 F05 F07
X max. 3 3
Y max. 2 2
L max. 40 40
5. Apply non-acidic grease at splines of coupling (e.g. Gleitmo by Fuchs).
SQR 14.2 Control unit - electromechanical
SQ 07.2 SQ 10.2
F05 F07 F10 F10
3 3 3 4
2 2 2 5
40 40 66 50
AC 01.2 Intrusive Profinet
SQ 12.2 SQ 14.2
F12 F12 F14 F14
4 5 5 8
5 10 10 10
82 61 101 75
F16
8
10
125