Mipt 300&600 Handsets - Alcatel-Lucent OmniPCX Enterprise Manual

APPENDIX 2
REMARKS & RESTRICTIONS
From Release 6.1, the available configurations are:
•
one Add-on module 10 keys
• one Add-on module 40 keys
•
one Add-on module 40 keys + one Add-on module 10 keys
•
one Electronic Add-On modules
• two Electronic Add-On modules
•
three Electronic Add-On modules
− Downloading the series 9 sets.
The loading of a dynamic patch with new binaries regarding the series 9 sets, are initialized
automatically following the type of downloading selected. This can eventually cause an
inconvenience for the client if the installation of the dynamic patch is carried out in the daytime;
you should:
•
set the field Download policy (Phone Facilities categories) to Delayed
•
install the patch.
− As of Release 8.0, the display of the Chinese, Japanese and Korean on IP Touch sets requires the
use of new fonts (22 000 characters for the Chinese).
These fonts are supplied in the form of files of location downloaded in Flash of the IP Touch sets
when selecting the display language of the terminal.
The taking into account of these location files involves a reset of IP Touch.
− As of Release 9.1, Hebrew strings are offered on 4028/4038/4068 sets (Fast Ethernet or
Extended Edition). The Call-By-name feature won't benefit from it.
Restriction: This new language is not available on IP Desktop Softphone, 4008/4018, X9 series,
DECT, MIPT sets.
− As of Release 8.0, all Alcatel series 8 & 9 sets except 4008 can be managed as associated set to
A4059-IP attendant equipped with a MMK USB keyboard.
− As of Release 8.0, the customization of series 8 & 9 set ringing is available with the use of
"Online Service MyRingtone" application available on Business Portal.
− In Release 8.0, the IME (Input Method Editor) mode allows a user to enter non-Latin characters
on series 8 & 9 sets using a standard Latin keyboard (with or without special marking on
keyboard) for carrying out a call by name or for managing the softkeys.
− Signature of START_RTP.
In Release 9.0, during the IP Touch initialization, the CS checks the MAC address of the set,
returned at the START_NOE TFTP request, and the MAC address of the set, returned during the
signaling link initialization of the set. A new field was added in IP-link protocol in the message
that returns the IP address of the set. If this new field is not present in the signaling message the
initialization of the set is still performed, but the incident 441 is generated. This mechanism is not
implemented on the MIPTs and IP SoftPhones.
10.4. MIPT 300&600 handsets
TC1449
OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
24
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011