Updating The Beta Test Systems; System Management; Declaring The Automatic Start-Up Of The Telephone; Updating The Date And Time - Alcatel-Lucent OmniPCX Enterprise Manual

INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0

13. UPDATING THE BETA TEST SYSTEMS

All the Release 10 beta test sites should evolve to released version J1.410.34.c.

14. SYSTEM MANAGEMENT

Use the menu swinst/System management.

14.1 Declaring the automatic start-up of the telephone

Procedure
login
password
option 6
option 2
option 1

14.2 Updating the date and time

Procedure
login
password
option 6
option 2
option 1

15. CHECKING START-UP OF CPU/IO1/IO2/IO2N

CAUTION
− On a duplicated installation, if an IO2 or IO2N is declared in the database, it is essential that it
be present when starting up, otherwise the CPU will not restart. In fact, telephone signaling is now
processed by the IO2 or the IO2N when present (otherwise it is processed by the IO1 module of
the CPU as in previous versions). It is however possible to start without IO2 or IO2N using the
command
RUNTEL -DNOIO2 in mtcl.
− If this first start-up is carried out on a model, put in place at least one UA or Z coupler in place of
a UA or Z coupler of the site as this will allow the correct operation of the IO1 or the IO2/IO2N
to be checked.
Ed. 02 / 22 June 2011
OmniPCX Enterprise
swinst
SoftInst
System management
Autostart management
Set autostart
swinst
SoftInst
System management
Autostart management
Set autostart
53 TC1449