Network & Voip Compatibility; Abc-F2 Trunk Group Compatibility Summary; Number Of Compressors/Algorithms That Can Be Used With Intipx And Gdx/Gax - Alcatel-Lucent OmniPCX Enterprise Manual

INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
7.5 Network & VoIP compatibility

7.5.1 ABC-F2 trunk group compatibility summary

< Release 5.0 Ux
Release 5.0 Ux
Release 5.0 Lx
Releases
5.1.x
6.x
7.x
8.0
8.0.1
(1)
Releases
9.0
9.1
(1) This Release is no more supported. Only the progressive migration is allowed.
(2) See Appendix 2.

7.5.2 Number of compressors/algorithms that can be used with INTIPx and GDx/GAx

The term INTIP (resp. GD, GA) concerns INTIP boards as well as INTIP2 (resp. GD2, GA2).
REMINDER
LIO P/B/X COMP6 and LIOE boards are prohibited as soon as there is a node in R7.1 in the
network. Moreover, the LIO P/B/X -COMP6 boards are not authorized in a network with
INTIP or GA/GD.
Ed. 02 / 22 June 2011
OmniPCX Enterprise
Release 10.0
ABC trunk group only
No Total compatibility
but progressive migration
authorized (1)
Total
ABC-F compatibility
(2)
Observation
No progressive migration to a network
UTF-8 compatibility: set the New Local Name
UTF-8 for users system parameter to False
See table in 7.4.2
Audit/Broadcast: E2.404.b
E2.504.1.e
UTF-8 compatibility: Set the Enable UTF8 in
ABCF network system parameter to False if a
node is in a non-compatible UTF-8 version
Set the Direct RTP and H323 Internode
Protocol system parameters to True in all nodes
See table in 7.4.2
Refer to the technical communication
Wrong IP Touch Ethernet port speed negotiation
using Gigabit sets
Set the Direct RTP and H323 Internode
Protocol system parameters to True in all nodes
29
- E2.502.2.e -
TC1090
if
TC1449