Directory - Alcatel-Lucent OmniPCX Enterprise Manual

INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
•
The CLIP information is presented on an incoming call to an analog terminal that is on-hook
and is receiving ringing.
• The feature is released only for 6 countries (France, USA, China, Taiwan, Pakistan and Hong-
Kong).
•
A CLIP terminal cannot receive an incoming call during the first 9.5 seconds after it has gone
on-hook.
• CLIP is not available for analog phones associated with the 4980 My Softphone application.
• Some telephones only displayed the calling number and not the calling name.
•
The following sets have been validated for the US market: AT&T 9357, Uniden EXAI3781,
Sony IT-ID20, GE ATLINKS 29196GE1-A, Panasonic KX-TC1703, Bell South 900Mhz
MH9942BK
•
Alcatel-Lucent can't test and maintain a list of compatible telephone because there are
thousands of different phones. Business Partner should contact Professional Services to
undertake the validation of specific telephones on a case-by-case basis. Telephone vendors
should contact the Alcatel-Lucent Business Partner Program to carry out such validation of
their product.
− CLIP on SLI and MIX.
•
As of Release 8.0, SLI and MIX boards on common hardware supports the CLIP FSK ETSI or
Bellcore.
• Some telephones only displayed the calling number and not the calling name.
• Alcatel-Lucent can't test and maintain a list of compatible telephone because there are
thousands of different phones. Business Partner should contact Professional Services to
undertake the validation of specific telephones on a case-by-case basis. Telephone vendors
should contact the Alcatel-Lucent Business Partner Program to carry out such validation of
their product.
− CLIP Bellcore on NDDI2.
CLIP on NDDI2 is available for all markets from Release 6.1.
− CLIP Bellcore on APA.
•
CLIP on APA line (CLIDSP daughter board - 3EH 73034 AB) is available for all markets from
Release 6.1.
− CLIP DTMF on APA.
In R6.2 the CLIP DTMF on APA line (CLIDSP daughter board - 3EH 73034 AB) is available for
India and Taiwan.
15.

DIRECTORY

− External LDAP Server.
•
LDAP overflow is available on all sets.
•
Only Alcatel-Lucent 40x8 and 40x9 sets as well as Reflexe/eReflexe have a "Overflow" softkey.
•
During a phone book search with LDAP overflow setup, the PCX searches its local phone
book the corresponding entries to the search.
Ed. 02 / 22 June 2011
OmniPCX Enterprise
29
APPENDIX 2
REMARKS & RESTRICTIONS
TC1449