Application Domain; Reference Documents - Alcatel-Lucent OmniPCX Enterprise Manual

INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
1.

APPLICATION DOMAIN

WARNING
This document applies to the OmniPCX Enterprise Release 10.0 in standardized version J1.410.34.c.
In term of corrections, patch J1.410.34.c is at the same level than G1.503.35.g / H1.301.48 /
I1.605.23 and only introduces new features.
Additional corrections of major RAs, coming from I1.605.24 to I1.605.26 have been integrated
selectively.
This document is based around a central document, the Release 10.0 installation procedure, and
appendices which describe:
− The restrictions and remarks.
− The new features.
Note
The appendices below of previous installation procedures were removed from this document and
replaced by technical communications to make easier their search and their update:
− The comparison of licenses from R5.0 Ux.
− The migration from an OmniPCX 4400 to an OmniPCX Enterprise.
− The synchronization of the system after migration to an OmniPCX Enterprise with an Appliance
Server.
− The reminder of features released in previous releases.
2.

REFERENCE DOCUMENTS

Technical communications:
TC0150 Configuring the OmniPCX 4400 as "boot server" for IP Phones attached to networked
OmniPCX 4400
TC0155 Compatibility of Alcatel 4635 with OmniPCX 4400 backplanes (Reminder of restrictions)
TC0230 CPU6 Step2 board - 3BA23197 AA
TC0259 Alcatel 4635 - Migration procedures
TC0274 DECT Compatibilities
TC0297 Change of external/internal ringing melodies in Release 4.2
TC0298 Migration from Alcatel 4630 voice mail to Alcatel 4635 voice mail
TC0328 Wrong initialization of "Antenna Diversity" after translating from Release 3.0 to Release 3.1,
3.2M, 4.1, 4.1.1
TC0336 Setting the T38 fax over IP application (with MP-102 version 4.0)
TC0418 Compatibilities
TC0487 Migration ACD-V1 to CCDistribution
TC0594 Coupling a Bluetooth device on Alcatel IP Touch set 4068
Ed. 02 / 22 June 2011
OmniPCX Enterprise
9 TC1449