Ip Crystal Media Gateway - Alcatel-Lucent OmniPCX Enterprise Manual

APPENDIX 2
REMARKS & RESTRICTIONS
5.

IP CRYSTAL MEDIA GATEWAY

In the document the name "INTIPA or B" concerns the INTIP board as well as the INTIP2 board.
− Only one Voice Hub or M1 or M2 cabinet is supported for the IP Crystal Media Gateway in the
main zone.
− The GPA2 is supported in the IP Crystal Media Gateway.
− In peripheral zone all 4400 boards are supported.
− INTIP board cannot be used with embedded Ethernet (a CBC1 10/100 connector must be used).
− INTIPA board can be used with 100 Mbits. With a VH cabinet you have to use the Patch Panel
10/100Mbits Reference 3BA 23244 AAAA 01.
− 100 Mbits compliance with WM1 and VH cabinets for CPU6 Step2 and CPU7.
The CPU7 board is not allowed in a VH cabinet.
All cabinets are or will be compatible with 10/100BaseT. The VH and WM1 cabinets compatible
10/100BaseT will be available soon with the following references:
VH (10/100BaseT) Basic Rack 48V
VH (10/100BaseT) Basic Rack 48V - USA
VH (10/100BaseT) Basic Rack 90W
VH (10/100BaseT) Basic Rack 90W - USA
VH (10/100BaseT) Extension Rack 48V
VH (10/100BaseT) Extension Rack 48V - USA
VH (10/100BaseT) Extension Rack 90W
VH (10/100BaseT) Extension Rack 90W - USA
WM1 (10/100BaseT) Basic Packed 110/230V
WM1 (10/100BaseT) Basic Packed 110/230V - USA
WM1 (10/100BaseT) Basic Packed 48V
WM1 (10/100BaseT) Basic Packed 48V - USA
WM1 Battery package (battery autonomy 1.2 Ah)
WM1 Battery package (battery autonomy 1.2 Ah)- USA
Note
If the referenced cabinets above are not used, the CPU6 Step2 and CPU7 boards will work at 10
Mbits maximum.
TC1449
OmniPCX Enterprise
Designation
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
12
Reference
3BA 56191 AN
3BA 56191 UN
3BA 56193 AN
3BA 56193 UN
3BA 56192 AN
3BA 56192 UN
3BA 56194 AN
3BA 56194 UN
3BA 27112 AN
3BA 27112 UN
3BA 27113 AN
3BA 27113 UN
3BA 57106 AC
3BA 57106 UB
Ed. 02 / 22 June 2011