Procedure 7-13 To Remove 9500 Mpr Port Protection; Procedure 7-14 To Configure A Loopback Test On A 9500 Mpr Ds1, Es1, Or 1 X Radio Modem Port - Alcatel-Lucent 5620 User Manual
Service aware manager
Hide thumbs
Also See for 5620:
- Troubleshooting manual (306 pages) ,
- Planning manual (144 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
7 — 9500 MPR/9500 MPRe port object configuration
9
Click on the Yes button. The Port (Edit) form closes.
10
Verify that the protection is enabled. The status of the main port should be Active
and the status of the spare port should be Standby.
Procedure 7-13 To remove 9500 MPR port protection
1
Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2
Expand the 9500 MPR icon, right-click on the 9500 MPR spare port object, and
choose Properties from the contextual menu. The Network Element (Edit) form
opens with the General tab displayed.
3
On the Network Element (Edit) form navigation tree, expand the Shelf icon.
4
Expand the Card Slot icon and click on the port object that you need to configure.
The Port (Edit) form opens with the General tab displayed.
5
Click on the Protection tab.
6
Set the Protection Type parameter to No Protection.
7
Click on the OK button. A dialog box appears.
8
Click on the Yes button. The Port (Edit) form closes.
9
Verify that the protection is removed from the previously main and spare ports.
Procedure 7-14 To configure a loopback test on a 9500 MPR DS1,
ES1, or 1 x radio modem port
Perform the steps in this procedure as required on the port type that you are
configuring.
1
Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2
Expand the 9500 MPR NEs icon.
3
Right-click on the device on which you want to configure a loopback test and
choose Properties from the contextual menu. The Network Element (Edit) form
opens with the General tab displayed.
4
On the Network Element (Edit) form navigation tree, expand the Shelf icon.
7-16
Note — If 1+1 HSB is configured as the protection type for an MPT port,
the transmitter must be muted from the NEtO to remove the protection.
September 2013
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Advertisement
Table of Contents
