Connecting Room Control Systems - SMART Board 6000S Series Installation And Maintenance Manual

Chapter 3 Connecting computers and other devices
SMART Board 6000S (V3)
Notes
If you connect an external speaker system to the display using the Sony/Philips Digital Interface
l
(S/PDIF) out connector and the audio source device is connected to the display using an HDMI
2.0 connection, the external speaker system must support HDCP 2.2. For more information, see
SMART Board interactive flat panels and High-bandwidth Digital Content Protection (HDCP).
The S/PDIF audio is a fixed-volume output. Adjusting the display's volume for its internal speakers
l
does not affect the volume output of the S/PDIF port.

Connecting room control systems

A room control system enables users to control a room's lighting, audio system and, possibly, the display.
Some installations may require you to integrate the display with a room control system.
You can use the display's RS-232 connector to connect a third-party external control system to the
display (see Appendix D Managing SMART Board 6000S (C) or 6000S series displays using RS-232 on
page 85 or Appendix C Managing the SMART Board 6000S (V3) display using RS-232 on page 77).
Note
Displays are not compatible with centralized remote control systems, such as a universal remote
control.
smarttech.com/kb/171414
SMART Board 6000S and 6000S (C)
40