SMART Board 6000S Series Installation And Maintenance Manual page 74

Appendix A Adjusting settings
Only available on 6000S (V3) displays.
From the SMART Mirror home screen, select Settings
General
Room Name
Language selection
Moderator
Moderator mode
Network & Connections
Connections
Airplay Receiver
Security
Local connections only
Require Pin to connect
smarttech.com/kb/171414
Values Function
[N/A] Assign a name to this device for your
network.
[N/A]
Values Function
On Control who can invite participants.
Off
Values Function
On Enables or disables the AirPlay
protocol.
Off
Values Function
On
Off
On Turn on to require participants to
enter a 4-digit PIN to connect.
Off
.
Notes
It's
recommended to
use a unique
name (like the
room name).
Notes
When moderator
mode is on,
participants must
be invited to
present their
screens.
Turning on
creates a new
session.
Notes
Notes
When local
connections is set
to on,
participants will
only be able to
connect to
sessions while on
the same
network.
Default is off.
User or system
setting
System
User or system
setting
System
User or system
setting
System
User or system
setting
User
User
74