Appendix D Managing SMART Board 6000S (C) or 6000S series displays using RS-232
Screen shade commands
Get command
get screenshade
Volume commands
Get command
get volume
Mute commands
Get command
get mute
Firmware version commands
Get command
If one display is connected
get fwversion
If multiple displays are connected
[Display],@ get fwversion
Where [Display] is the display's label (A, B, and so on).
smarttech.com/kb/171414
Set command
set screenshade[Value]
Where [Value] is one of the following:
=on
l
=off
l
Set command
set volume[Value]
Where [Value] is one of the following:
+[Value]
l
-[Value]
l
=[0–100]
l
Set command
set mute[Value]
Where [Value] is one of the following:
=on
l
=off
l
Response
fwversion=[Value]
Where [Value] is the firmware version.
@,[Display] fwverversion=[Value]
Where
[Display] is the display's label (A, B, and so on).
l
[Value] is the firmware version.
l
Response
screenshade=[Value]
Where [Value] is one of the following:
on
l
off
l
Response
volume=[Value]
Where [Value] is a number between 0
and 100
Response
mute=[Value]
Where [Value] is one of the following:
on
l
off
l
93