MSA FieldServer QuickServer FS-QS-1011 Startup Manual page 51

Select "Full Diagnostic" from the drop down menu
o
NOTE: If desired, the default capture period can be changed.
o
Click on the Start Diagnostic button
o
Wait for the capture period to finish and the Diagnostic Test Complete window will appear
•
Step 2: Send Log
o
Once the diagnostic test is complete, a .zip file is saved on the PC
Click "Open" to launch explorer and have it point directly at the correct folder
o
o
Email the diagnostic zip file to smc-support@msasafety.com
QuickServer Start-up Guide
Troubleshooting
51