Figure 19: Warning Expanded Text; Figure 20: Fieldserver Login - MSA FieldServer QuickServer FS-QS-1011 Startup Manual

•
Additional text will expand below the warning, click the underlined text to go to the IP Address. In
example this text is "Proceed to 10.40.50.94 (unsafe)".
the Figure 19
•
When the login screen appears, put in the Username (default is "admin") and the Password (found
on the label of the FieldServer).
NOTE: There is also a QR code in the top right corner of the FieldServer label that shows the
default unique password when scanned.
NOTE: A user has 5 attempts to login then there will be a 10-minute lockout. There is no timeout
on the FieldServer to enter a password.
NOTE: To create individual user logins, go to Section 10.3.

Figure 19: Warning Expanded Text

Figure 20: FieldServer Login

QuickServer Start-up Guide
Setup Web Server Security
24