Retrieve The Configuration File For Modification Or Backup; Figure 30: Retrieve Configuration File - MSA FieldServer QuickServer FS-QS-1011 Startup Manual

6.4.2

Retrieve the Configuration File for Modification or Backup

To get a copy of the configuration file for modifying or backing up a configuration on a local computer, do
the following:
•
In the main menu of the FS-GUI screen, click "Setup", then "File Transfer".
•
Click the "config.csv" link under the "Retrieve" heading in the middle section of the screen.
The file will automatically download to the web browser's default download location.
o
•
Edit or store the file as desired.
NOTE: Before using any backup configuration file to reset the configuration settings, check that
the backup file is not an old version.

Figure 30: Retrieve Configuration File

QuickServer Start-up Guide
Configuring the Gateway
33