Direct connection
The following explains the setting procedure when connecting a MELSECWinCPU module and a target device.
To use this connection method, set "Enable" for "Disable Direct Connection with MELSOFT."
[Module Parameter] [Application Settings] [Security] [Disable Direct Connection with MELSOFT]
Window
Displayed items
Item
Disable Direct Connection with
MELSOFT
Operating procedure
1.
Set "Ethernet Board" for "PC side I/F" in the "Specify Connection Destination" screen.
[Online] [Current Connection Destination]
2.
Double-click "Ethernet Board."
The "PC side I/F Detailed Setting of Ethernet Board" screen is displayed.
3.
Select "TCP" or "UDP" for "Protocol."
13 MELSOFT CONNECTION FUNCTION
136
13.1 Connection Method
Description
Select whether to disable the direct connection (easy connection) with
the engineering tool.
Setting range
Default
• Disable
Enable
• Enable