Description And Technical Specifications; Digidriver - ProLights DIGIDRIVER User Manual

DIGI series
4

- 1 - DESCRIPTION AND TECHNICAL SPECIFICATIONS

1.1 DIGIDRIVER

DIGIDRIVER is a driver which provides power and processing to all the fixtures of the DIGI series (tube,
strip, bar, tile). It controls up to 24 DIGISTRIP, 16 DIGITUBE, 6 DIGIBAR, 6 DIGITILE, offering 6 DMX uni-
verses and 350W of power in out, in a one rack unit. DIGIDRIVER is compatible with both Art-Net and
Kling-Net protocol and runs signal and power over a 4 pole XLR cable that allow wiring of units in a chain.
The user interface consists in a black OLED display for settings, protocol selection, Network address and
test patterns.
Technical Specifications
• Control protocols: Art-Net, Kling-Net
1000
• Electronics in full digital control with front panel and OLED display
• Automatic self-test function even in the absence of a console
• Control output: 4-pin XLR connector
• Data Connection: two Ethernet connectors (RJ45) for data source and secondary driver link
• Universes: 6 universes
• Channels for universe: 480
• Power supply: AC 100-240V, 50/60Hz, Neutrik PowerCon
• Maximum consumption: 350W (to handle 24 DIGISTRIP/16 DIGITUBE/6 DIGITILE/6 DIGIBAR)
1000
• Steel body
• Internal Protection: IP20
• Weight: 2,5 kg
• Dimensions (WxHxD): 483x54x150 mm
300 118
1155
150
483
Technical drawing
Fig.1