Introduction; Serial Numbers - M&C SP Series Instruction Manual

6

INTRODUCTION

Major problems of the extractive continuous gas analysis are the materials contained in the sample gas e.g. dust,
water vapour and also gas components forming corrosive acids with condensing water vapour.
In order to realize an easy-to-maintain measurement the dust has to be separated without condensation of water
vapour. This prevents „baking" of dust and water and the possible acid formation. This way a blockage of filters and
connected line is prevented and the probe material in contact with the gas will not be affected.
The solution are heated M&C sample probes like e.g. probes of the series SP2000... This probes guarantee a mini-
mum of maintenance work if correctly adapted to the process conditions. At the continuous gas sampling for ana-
lytical measurements with M&C gas sample probes a fine dust filtration already happens at the sample point.
Hereby already a majority of necessary maintenance work at analyzer systems is prevented.
Basically, the quantity of sampled gas should be kept to a necessary minimum to guarantee a minimum of mainte-
nance work and a maximum of availability. This is made possible thanks to optimised downstream gas conditioning
using M&C components.
7

SERIAL NUMBERS

The nameplates bearing the serial number are located on the side of the electrical connection box.
Always quote the device's serial number when making enquiries and ordering replacement
parts.
Note
www.mc-techgroup.com SP2000, SP2300, SP2400 | 1.00.03 9