Option Pneumatic Drive Ms1 Or Ms3 When Using A 3/2-Way Ball Valve /3Va; Figure 14 Pneumatic Drive For 3/2-Way Ball Valve - M&C SP Series Instruction Manual

16.3.2

OPTION PNEUMATIC DRIVE MS1 OR MS3 WHEN USING A 3/2-WAY BALL VALVE /3VA

Two functions can be realized with the pneumatic actuator MS1 or MS3 in connection with the 3/2-way ball valve
/3VA
1. Measuring and blow back MS-B
2. Measuring and test gas feeding MS-C
Figure 14 Pneumatic drive for 3/2-way ball valve
When placing the order it shall be specified whether the ball valve should be
NC, without control air closed resp. switched to test gas feeding or blow back, or
NO, without control air open and hence switched to measuring.
Standard = NC
32 SP2000, SP2300, SP2400 | 1.00.03 www.mc-techgroup.com