Table of Contents
Advertisement
48
Downloading firmware upgrades
Downloading a BootROM load
!
9.
Press DL Boot
If the server is not busy, it sends the new BootROM load to the set.
When the server is busy, the M5317TX attempts to contact the server
at 60 second intervals until a successful connection is established.
As the download is transferred, your display shows a series of dots.
After successful downloading, the set automatically reverts to
BootROM mode and re-initializes.
10. Proceed to the next section to download the MainROM load.
Downloading a MainROM load
11. If the download menu is not shown on your display, repeat steps 1-8.
12. Press DL Main.
If the server is not busy, it sends the new MainROM load to the set.
When the server is busy, the M5317TX attempts to contact the server
at 60 second intervals until a successful connection is established.
As the download is transferred, your display shows a series of dots.
13. When the display indicates the download was successful, or if the set
has been unable to contact the server after several attempts, press Exit.
After successful downloading the set automatically goes into
MainROM operation and is available for use. When an error code is
displayed, repeat steps 11-13.
M5317TX and CustomNet Installation Guide
WARNING
Do not remove power to the M5317TX during BootROM
downloading. If power does fail during the process, the
download will fail and the set might be damaged.
Advertisement
Table of Contents
