Verifying The Protocol; Displaying The Firmware Version - Northern Telecom M5317TX Installation Manual

40 Customizing the M5317TX

Verifying the protocol

1. At the idle display screen, press Setup (press more... if Setup is not
displayed).
Select update item
Lang
2. Press more... until Protocol is displayed.
Select update item
Version
3. Press Protocol. Your display shows the current protocol configured on
the set, as shown in the following example:
NI-1(DMS)
4. Press Exit. Press Exit again to exit the Setup menu.

Displaying the firmware version

1. At the idle display screen, press Setup(press more... if Setup is not
displayed).
Select update item
Lang
2. Press more... until Version is displayed.
Select update item
Version
3. Press Version. Your display shows the current firmware version, as
shown in the following example:
Version 3.3A
4. Press Exit. Press Exit again to exit the Setup menu.
M5317TX and CustomNet Installation Guide
Data Clock
Protocol Query
Functional Sig
Data Clock
Protocol Query
Volume more
Ringing more
NT-TRF.000
Exit
Volume more
Ringing more
Exit